Close-up of charcoal standing seam metal roof panels

Standing Seam Metal Roofing on Vancouver Island

Standing seam metal roofs for Vancouver Island homes, barns and commercial buildings, in 12, 16 and 20-inch panels. Re-roofs and replacements by a Red Seal-led sheet metal team based in Shawnigan Lake.

What a standing seam roof is

A standing seam roof is made of long metal panels that run from the ridge down to the eave, joined along raised seams that stand above the flat of the roof.

Those raised seams give the roof its name, and they do the important work. They lock the panels together and keep every joint up and out of the water running down the roof. The panels are held with clips hidden under the seams, so there are no exposed screws across the face of the roof.

It is also a roof that rewards careful sheet metal work. Ridges, hips, valleys, chimneys and skylights all need flashing that is cut and bent to fit, which is exactly the trade a Red Seal sheet metal worker is trained in.

Stellar Metal Exteriors crew installing a charcoal metal roof on a home with wood siding
Our crew installing a charcoal metal roof

Who standing seam roofing suits

For homes, new builds, barns and commercial buildings.

  • Homeowners replacing a roof

    A re-roof that changes how the house looks and how it handles the weather. The Duncan re-roof below is a typical example.

    Duncan re-roof
  • New builds and custom homes

    Planned in from the start, with the panels, trim and flashing laid out around the house before the first sheet goes on.

    New construction metal roofing
  • Barns, shops and outbuildings

    Long, simple roof planes suit standing seam well, like the 12-inch snap-lock barn roof we put on in Cobble Hill.

    Cobble Hill barn roof
  • Commercial and multi-family

    Standing seam on commercial and multi-family buildings, alongside our cladding and architectural sheet metal.

    Commercial work

Built for Vancouver Island weather

Long wet winters, wind off the water and moss from the forest canopy. A South Island roof works hard.

  • Rain

    Each panel runs in one piece from ridge to eave with the seams raised above the water, so rain has a clear, unbroken path off the roof.

  • Wind

    Interlocking seams and concealed clips hold the panels down, with no exposed fasteners across the roof face to work loose.

  • Moss and needles

    A smooth metal surface gives moss very little to hold on to, and needles and debris rinse off with the rain.

Dark brown standing seam metal roof panels running down the roof slope

How a metal roof project works

Four steps, with the timeline in writing before work starts.

  1. 1Free estimateWe look at the project with you, talk through the options and answer your questions.
  2. 2Detailed written quoteClear scope, with a timeline for your project.
  3. 3InstallationMost metal roofs are finished within a month. Larger projects can take longer.
  4. 4Final walkthroughWe walk the finished work with you before we call the job done.

Panel widths, drawn to scale

We install standing seam in three panel widths. Each strip below is eight feet of roof: narrower panels give a tighter seam rhythm, wider panels give broader, calmer planes.

  • 12in

    12-inch snap-lock

    A tight, detailed seam rhythm. Used on the barn roof in Cobble Hill. Cobble Hill barn roof

  • 16in

    16-inch

    A balanced, classic look for homes. Used on the Duncan re-roof with a covered entryway. Duncan re-roof

  • 20in

    20-inch

    Broad, calm planes with fewer seams. Shown here on a brown re-roof around skylights.

Colours on our recent roofs include charcoal, grey, brown and green. We go through panel width and colour with you at the free estimate.

Recent standing seam roofs

All projects
  • Green metal roof on a timber home
  • Brown standing seam with a clad chimney
  • Grey standing seam among the trees
  • Brown standing seam panels going on
  • Hip and ridge detail

What roofing clients say

5.0 on Google

“Stellar Metal Exteriors did our standing seam metal roof in Duncan plus they cladded our fascia boards. They were reliable and did an excellent job with the roof. I am so happy with the way it turned out.”
Jackie Wood · Duncan · Google review
“Cam and his team at Stellar Metal Exteriors just redid my roof. Great work done safely. Would recommend.”
Chris McElman · Google review
“Cam did our siding and roofing and I couldn't be happier with the results! Very impressed with the entire experience. He was professional, reliable, and had excellent communication throughout the project. Our home looks amazing!…”
Katarina Bickford · Google review
BBB Accredited BusinessRated 5.0 from 5 Google reviews.

Metal roofing questions

Straight answers from a Red Seal sheet metal worker. Anything else, just ask.

Call (250) 634-2230

Most metal roofs are finished within a month. Larger projects can take longer. You get a timeline with your quote.

Yes. Estimates are free and come with a detailed quote.

Yes. Stellar Metal Exteriors is licensed, insured and registered with WorkSafeBC, and is a BBB Accredited Business.

Get a free metal roofing estimate

Tell us about the roof: size, current material and any skylights or chimneys. We take it from there.

What happens next

  1. 1Send the form or callTell us about the roof, siding or building.
  2. 2Free estimateWe look at the project and talk through options.
  3. 3Detailed written quoteClear scope, with a timeline for your project.
  4. 4InstallationMost metal roofs are finished within a month. Larger projects can take longer.
(250) 634-2230stellarmetalex@gmail.comOpen 7 days, 9 a.m. to 5 p.m.

Request a Free Estimate

Project type

We only use your details to reply about your project. Privacy Policy

CallGet a Free Estimate